8,153
edits
Changes
From Fellrnr.com, Running tips
no edit summary
It should be perfectly possible to video a runner outside, but you'll only get a small number of strides, and it can be tricky to analyze the motion as effectively as you can when recording on a treadmill. The main downside of a treadmill is that most runners have a slightly different running form compared with running outside. Ideally, you want a treadmill that doesn't have a side rail that gets in the way of the camera's view of the runner. This is mostly an issue with measuring movement of the hip from the side, so it's not a huge deal.
==Markers==
The Kinovea software tracks motion using visual markers. These markers should be round, as the software doesnand I've found these <jfs id=" B010L610EC " noreferb="true" n="50 Colored Ping Pong Balls," nonl="t understand a rotating marker" /> worked pretty well. I simply use duct tape looped around to stick them to my clothing. SoYou can read more about the various types of markers I've tested further down this page, if you and there are other approaches that might work for your situation. I put a red square markers on your my forefoot, heel, ankle, as that square turns with your leg movementknee, hip, shoulder, wrist, the software will lose trackand head. You also want the marker Which locations you choose to be track will depend on a plain background that has good contrast with the markerwhat you're trying to measure. I==Clothing==It've used ping-pong balls attached s important to black running tights with sticky tape which provides high contrast wear clothing that is skintight and plain. Loose clothing will move independent of your body and give incorrect tracking. If the spherical ping-pong ball looks the same clothing is patterned, it's likely to the camera even if there is some twisting motionconfuse Kinovea. For my upper body, I use wear black tights and a white, long-sleeved compression top and I'm experimenting with various markers. I've found Wearing black socks to match the black tights helps avoid create a colored area that a round piece of tape can work, but confuse the twisting of my upper body can rotate the marker too muchtracking. Tracking motion on Initially I chose predominantly black shoes is a little trickier, as most shoes have complex patternsand covered them with black duct tape for use with white markers. I put After some black tape over a mostly black shoeexperimentation, and glued on ping-pong balls which worked reasonably well. I'll add more details found that as long as I try different markers. My aim the marker is a strongly contrasting color to track the forefoot, heel, ankle, knee, hip, shoulder, wristshoe, and head. As I experiment more, Ithe shoe doesn'll give some feedback t have any of the marker color on what markers are most usefulit, there is no problem.
==Room==
The room you use to take the measurements is surprisingly important. It's critical you have lots of light, so that the cameras shutter speed is fast enough to freeze the motion. You also need enough distance between the treadmill and where you set up the camera that you're not getting perspective distortion. A plain background behind the treadmill is best, though you can get the software to work against a visually noisy background. (Some functions, like tracking angles, may not work quite right.) The room should also have a fairly solid floor, so that the running doesn't balance the camera. Adding something of a known size into the frame at the same distance as the runner can help is needed if you want to calibrate sizemeasurements.
=Recording =
It's worth spending a little time to get the camera positioned correctly. You want the runner to fill most of the frame so that you're not wasting resolution. If you want to evaluate the runner with the treadmill at an incline, don't forget to allow for this when positioning the camera. You want the camera positioned perpendicular to the runner, and as level as possible. Ensure the camera has the near edge of the treadmill in view so that it can see each foot strike. I used a Bluetooth remote control to record my running, and I'd recommend using the remote control even if you have a friend helping you. You don't want to touch the phone when starting and stopping recording as any camera shake will cause problems. I'd recommend recording several relatively short clips (~30 seconds), as high-speed video takes up a lot of memory. The more powerful your PC, the longer the segment you'll be able to process.
* You normally set up a "working window" as a subset of the video clip. For performance, only a small subset of the video can be loaded into memory for analysis. Play video, or click on the main timeline to choose your starting point, then click the "[" button to mark the start. Likewise, at the end of your chosen section use the "]" button.
* To track movement, moved to the beginning of your working window. You'll want to right click on a marker, and select "track path". It's easier to click the middle of your marker if you're zoomed in, which you do using control and the mouse wheel.
* Once you'd set your track point you'll see two concentric rectangles and a small cross. The cross marks of the center of the object being tracked, and the inner rectangle should surround your marker, with a little bit of the background included. The larger rectangle is the search window. For each frame, the software looks for the image in the small rectangle within the area defined by the larger rectangle. Getting these areas right is critical to successful tracking. If you right-click near the cross and select "configuration…" You'll get a dialogue that will allow you to tweak the size of the two rectangles.<br/>[[File:KinoveaConfigure.jpg|none|thumb|400px|]]* If you click play, or frame advance, you'll see the line made by the marker recorded on the playback window. If the line doesn't track your marker, but jumps around, it's a sign that the software is finding a better match for your object window within the search window. Tweaking these can often, but not always resolve the problem. The first time you play after asking Kinovea to track an object it will do the analysis, thereafter it will replay the track it recorded. You can see this analyzed section of the video as a pink bar in the time window.
* Within the configuration window, you can also set the software to display a metric such as acceleration, speed, etc. You can use this to determine the frame with the highest acceleration, or the slowest speed, or whatever else it is you're interested in. For instance, tracking vertical acceleration of a torso marker and looking for the frame with the maximum value would tell you when the greatest landing forces are likely to be.
* There is another option on the configuration dialog called "display rotation circle." This will show the circle around which a market is moving.
* You can measure angles by clicking the angle icon and then clicking on the video window. You then move the three points so they line up with the joint you're trying to measure, and it will display the angle. With the experimental version, you can right click on one of the points and select "track path" and the software will track the three markers, showing the changing angle as things progress. The problem I found with this functionality is that you can't tweak the object and search windows for each point, so it easily gets confused unless you have a really clear marker.
=Appendix – Testing Markers=
The Kinovea software tracks motion using visual markers. These markers should be round, as the software doesn't understand a rotating marker. So, if you put a red square on your ankle, as that square turns with your leg movement, the software will lose track. You also want the marker to be on a plain background that has good contrast with the marker. I tested a number of approaches to markers, and I found that colored ping-pong balls work best.
==Colored Ping-Pong Balls==
I started off using standard ping-pong balls, which work well against a dark background, but I needed something that would work with other colors of clothing and shoes. I tried painting standard white ping-pong balls, and then discovered that you could buy ping-pong balls in assorted colors quite cheaply. I found these <jfs id=" B010L610EC " noreferb="true" n="50 Colored Ping Pong Balls, " nonl="t"/> worked pretty well. There is a wide enough variety of colors to work on different backgrounds. I attached the ping-pong balls to my clothing using a loop of duct tape which worked fine in most cases. Ordinary double-sided sticky tape is quite strong enough, but I've not experimented with any of the extra sticky varieties. Touching the ping-pong balls to running shoes is a little trickier. The duct tape loop works okay, but they're far more likely to fall off a shoe than clothing. I did permanently attach a pair of ping-pong balls to some older shoes which works really well if that's an option. I covered the side of the shoe in black duct tape, then glued the ping-pong ball to it. If you use this approach, I'd recommend dropping the duct tape with sandpaper first, partly to reduce any reflections, and partly to give it a better key for the glue. I also found cutting a small X into the ping-pong ball where it's glued on helps strengthen the bond. I found that these colored ping-pong balls were the easiest to use, and produced the most useful tracks of any of the markers I've tried.
{| class="wikitable" style="margin-left: auto; margin-right: auto; border: none;"
|- valign="top"
|[[File:Big Balls.jpg|none|thumb|200px|This is a close up of the ping-pong balls with the loop of duct tape attached.]]
|[[File:Bigballs Shoes.jpg|none|thumb|200px|Here's a close up of the ping-pong ball on my shoes. You can see that the balls are stuck to duct tape that goes over the reflective patterns on the shoes.]]
|- valign="top"
|[[File:Big Balls 2-SS.jpg|none|thumb|200px|This is how the balls look overall. You can see that the shoulder ping-pong ball still looks round even though my shoulder is rotated away, if this was a flat bit of circular sticky tape, the software would struggle as it would've become partly out of sight.]]
|[[File:Big Balls 2.jpg|none|thumb|200px|This is the result of Kinovea tracking a number of strides. This is too many tracks over too many strides to be useful for analysis, it's only done to show how successful the marker is at being tracked.]]
|}
==Colored Tape Markers==
The advantage of using sticky tape is that you're more likely to have some hanging around that you can improvise with. I simply cut some circles out of blue decorators masking tape, and this worked reasonably well. I think there were some issues with my circles being rather roughly cut, and the blue color was not quite enough contrast against my black tights. I'm going to retest with some circular stickers of brighter colors.
{| class="wikitable" style="margin-left: auto; margin-right: auto; border: none;"
|- valign="top"
|[[File:Kinovea Tape-SS.jpg|none|thumb|200px|Here's the tape markers in use. You can see that the markers on the shoulder and knee no longer look round due to the slight rotation of the joint, something that doesn't happen with the spherical ping-pong balls.]]
|[[File:Kinovea Tape.jpg|none|thumb|200px|Like the image of the ping-pong balls above, this is the tracks from many strides. You can see the upper body markers were tracked fairly well, but some of the leg markers failed, and the tracks wander off on their own.]]
|}
==LED Lights==
Juanma K suggested I try using LEDs as markers. He'd successfully used string of LEDs with the unwanted lights taped over. I found an alternative style of LED that are individual lights - <jfs id="B01JYDGC4Q" noreferb="true" n="30 LED Party Lights," nonl="t"/>. These were quite bright and are easy to tape on. The main downside to these LEDs as markers is it you need fairly low light for them to stand out, which can make it tricky to see the overall position of the rest of your body. It can also be a little tricky running in very low light on a treadmill. The upside is that you don't have to worry about your clothing or background colors, especially if you use them in very low light.
{| class="wikitable" style="margin-left: auto; margin-right: auto; border: none;"
|- valign="top"
|[[File:LED Lights (2).jpg|none|thumb|200px|Here's the LED lights taped to a running shoe, one illuminated and one not.]]
|[[File:LED Lights (3).jpg|none|thumb|200px|This is a close up of one of the little LED lights. It shown here turned off so that you can see it more clearly. Each LED has 3 tiny coin style batteries to power it. You twisted the end to turn the light on and off.]]
|[[File:LED Lights (1).jpg|none|thumb|200px|This is a close up of the light illuminated. It's quite bright, but does tend to direct most of the light in the direction of the tube. This means that when it's taped to you the light is not pointing at the camera.]]
|- valign="top"
|[[File:Kinovea Lights Dark2.jpg|none|thumb|200px|In near darkness these lights work amazingly well for tracking. It's trivial to set up the object and search Windows, and there are no concerns with clothing color, or background patterns.]]
|[[File:Kinovea Lights Dim.jpg|none|thumb|200px|You might be able to get these LED markers to work in dim conditions, but I found it rather tricky. In brighter light than this it's impossible to track the LEDs.]]
|}
==Miniature Ping-Pong Balls==
I thought that a smaller sized ping-pong ball would work better than its launch her cousin. My expectation was the smallest size would be a little more precise, and the lighter weight would be a little more stable. I purchased some <jfs id="B011RAAJRU" noreferb="true" n="Mini Ping Pong Balls," nonl="t"/> that are 0.75"/19mm rather than the normal Ping Pong size of 1.5"/40mm. in practice, I found it rather harder to get Kinovea to track these small balls. I had to tweak the object and search windows to be quite a bit smaller, and even then it lost track of the balls on my lower legs. The upper body markers which I'd painted orange worked okay.
{| class="wikitable" style="margin-left: auto; margin-right: auto; border: none;"
|- valign="top"
|[[File:Miniballs.jpg|none|thumb|200px|The Mini ping-pong balls with a full-sized ping-pong ball for comparison. You can see the small loops of duct tape I used the stick them in place.]]
|[[File:MIniballs Shoes.jpg|none|thumb|200px| I glued a couple of mini ping-pong balls to some black duct tape hide stuck to my shoes.]]
|[[File:Painted Miniballs.jpg|none|thumb|200px|Here's the painting of the ping-pong balls. Spray painting ping-pong balls can be quite exciting, as they so light the spray from the can sends them spinning out of control. I'm sure that this is an excellent technique for applying paint to rectum objects, and might be an awesome experimental arts technique.]]
|- valign="top"
|[[File:Kinovea Miniballs1-SS.jpg|none|thumb|200px|Here you can see the mini ping-pong balls in place.]]
|[[File:Kinovea Miniballs1.jpg|none|thumb|200px|You can see the tracks on the lower legs are getting lost. (The lower legs are harder to track at least partly because they're faster moving.)]]
